Coverage across Greater London
Wherever you are in Greater London, we need the same three things to get started on sensor upgrades and replacement: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 77 in total.
Towns listed in Greater London: Croydon, Hackney, Harrow, Kensington, Camden Town, Canary Wharf, Islington, Bromley, Westminster, Barnet, Orpington, Finchley, Wembley, Willesden, Tottenham, Wandsworth, Enfield, Ilford, Hayes, Wimbledon, Ealing, Barking, Walthamstow, Battersea, Whitechapel, Fulham, Woolwich, Sutton, Edmonton, Hammersmith, Edgware, Kingston upon Thames, Streatham, Romford, Chelsea, Kilburn, Putney, Twickenham, Hounslow, Eltham, Hornchurch, Peckham, Acton, Southall, Ruislip, Beckenham, Surbiton, Richmond, Chiswick, Canning Town, Brixton, Sidcup, Tooting, Chingford, Clapham, East Ham, Bexleyheath, Mitcham, Holloway, Thamesmead, Catford, Greenford, Uxbridge, Leytonstone, Greenwich, Shepherd's Bush, Stratford, Purley, Lewisham, Erith, Carshalton, Feltham, Wood Green, Dagenham, Morden, Welling, the City of London.
What to think about for sensor upgrades and replacement in Greater London
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
- Care settings in Greater London often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
- Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
Sensor upgrades and replacement in Greater London: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
- Agree the price first. Before anyone travels to Greater London, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
- Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
- Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.
Get your door detecting people properly again. Contact us about sensor replacement in Greater London, with the visit cost confirmed before anyone attends.
Sensor upgrades and replacement in Greater London: questions
Will you record the sensor settings for our building in Greater London?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
What is the guide price for sensor upgrades and replacement in Greater London?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Greater London, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you price new sensors for my door in Greater London from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Do engineers carry sensors for doors in Greater London?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
What should I tell you when reporting a fault in Greater London?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
Which makes of automatic door can you work on in Greater London?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Do businesses in Greater London have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.