Covering Surbiton and nearby
Our coverage of Surbiton takes in the KT5 and KT6 postcode districts and the neighbouring parts of Greater London. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about sensor upgrades and replacement and we will confirm the arrangements and the price in writing.
Mixed-use blocks in Surbiton, with shops or offices at ground level and flats above, often have communal entrances run by a managing agent. Doors there have to suit residents, deliveries and visitors, and approval from the freeholder or agent usually comes before work starts.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Kingston upon Thames (1.5 miles), Molesey (3.6 miles), Ewell (3.6 miles), Twickenham (4.1 miles), Morden (4.3 miles), Epsom (4.4 miles).
What to think about for sensor upgrades and replacement in Surbiton
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
- Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
- Shopping parades and older shopfronts in Surbiton sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
Sensor upgrades and replacement in Surbiton: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for sensor upgrades and replacement and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
Has a risk assessment in Surbiton listed sensor upgrades? Send us the report and we will quote each item before any work is done.
Sensor upgrades and replacement in Surbiton: questions
Our door in Surbiton closes on people. Is that a sensor fault?
It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.
What is the guide price for sensor upgrades and replacement in Surbiton?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Surbiton, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you replace automatic door sensors in Surbiton?
Yes. Sensor replacement and upgrades in Surbiton are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.
Can you price new sensors for my door in Surbiton from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Do you offer service contracts in Surbiton?
Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.
Which makes of automatic door can you work on in Surbiton?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Who is responsible for automatic doors on escape routes in Surbiton?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.