Covering Bexleyheath and nearby
From shops and surgeries to schools, care homes and private houses, any building in the DA6 and DA7 postcode districts can be covered for sensor upgrades and replacement. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Victorian and Georgian terraces are common across London, and converted buildings in Bexleyheath may have steps, narrow hallways or shared front doors. A home door opener or an operator on a communal door has to work within those limits, and the engineer checks what will fit.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Welling (1.4 miles), Erith (2.1 miles), Thamesmead (2.9 miles), Sidcup (3.0 miles), Dartford (3.4 miles), Woolwich (3.8 miles).
What to think about for sensor upgrades and replacement in Bexleyheath
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
Sensor upgrades and replacement in Bexleyheath: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Send a photo of the door and sensor at your building in Bexleyheath, and we will confirm the visit price and the likely sensor before booking an engineer.
Sensor upgrades and replacement in Bexleyheath: questions
Can you upgrade sensors on an old door in Bexleyheath?
Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.
What is the guide price for sensor upgrades and replacement in Bexleyheath?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Bexleyheath, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Will you record the sensor settings for our building in Bexleyheath?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
Can a risk assessment in Bexleyheath tell us which sensors we need?
Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.
Are parts quoted before they are fitted?
Always. If a repair or service in Bexleyheath needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Can visits in Bexleyheath be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
Which building regulations apply to a new automatic entrance in Bexleyheath?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.