Coverage across Argyll and Bute
We treat Argyll and Bute as one service area for sensor upgrades and replacement, so a site on the edge of the area gets the same written pricing and the same standard of work as one in the busiest town centre. Specialist automatic door engineers working under our management carry out each visit. Choose from the 7 towns below, or contact us with any address.
Towns listed in Argyll and Bute: Helensburgh, Dunoon, Oban, Campbeltown, Rothesay, Tobermory, Bowmore.
What to think about for sensor upgrades and replacement in Argyll and Bute
- Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
- After a near miss at a door in Argyll and Bute, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Shopping parades and older shopfronts in Argyll and Bute sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Entrances facing busy roads in Argyll and Bute can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
- Sites in Argyll and Bute that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
Sensor upgrades and replacement in Argyll and Bute: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Share the details. Send the address in Argyll and Bute, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Ask for a price on new safety or activation sensors in Argyll and Bute. Each one is set up for the door's hazard zones and tested before the engineer leaves.
Sensor upgrades and replacement in Argyll and Bute: questions
Our door in Argyll and Bute closes on people. Is that a sensor fault?
It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.
How much should I budget for sensor upgrades and replacement in Argyll and Bute?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Argyll and Bute, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you price new sensors for my door in Argyll and Bute from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Will you record the sensor settings for our building in Argyll and Bute?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
Can visits in Argyll and Bute be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
How is the visit price set for work in Argyll and Bute?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Is a building warrant needed for a new automatic entrance in Argyll and Bute?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.