UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Argyll and Bute

Sensor upgrades and replacement in Rothesay

For care homes and healthcare buildings in Rothesay, sensor set-up matters as much as the hardware. Safety zones are set to detect people standing still or moving slowly, with longer hold-open times where residents or patients need them.

Town
Rothesay
Area
Argyll and Bute
Postcodes
PA20
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Rothesay and nearby

If your building is in Rothesay, or anywhere in the PA20 postcode district, we can arrange sensor upgrades and replacement. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Because a missing part can mean another crossing, engineers visiting Rothesay carry the common spares for the type of door they are working on. Where a specific part is needed, it is ordered in advance and brought on the same trip as the fitting.

What to think about for sensor upgrades and replacement in Rothesay

  • Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
  • Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
  • After a near miss at a door in Rothesay, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
  • Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
  • Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.

Sensor upgrades and replacement in Rothesay: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. For island addresses, travel is included in the agreed visit price. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Scotland

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

How it works

  1. Share the details. Send the address in Rothesay, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
  2. Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
  3. Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
  4. Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.

Get your door detecting people properly again. Contact us about sensor replacement in Rothesay, with the visit cost confirmed before anyone attends.

Sensor upgrades and replacement in Rothesay: questions

Our door in Rothesay closes on people. Is that a sensor fault?

It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.

What price range should I expect for sensor upgrades and replacement in Rothesay?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Rothesay, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Do you replace automatic door sensors in Rothesay?

Yes. Sensor replacement and upgrades in Rothesay are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.

Can you price new sensors for my door in Rothesay from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

Are parts quoted before they are fitted?

Always. If a repair or service in Rothesay needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.

How soon can an engineer get to Rothesay?

We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.

Who is responsible for automatic doors on escape routes in Rothesay?

The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.

Next step

Sensor upgrades and replacement in Rothesay

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.