Coverage across Argyll and Bute
Automatic door refurbishment across Argyll and Bute follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 7 towns we list, each with its own page, nearby places and guide prices.
Towns listed in Argyll and Bute: Helensburgh, Dunoon, Oban, Campbeltown, Rothesay, Tobermory, Bowmore.
What to think about for automatic door refurbishment in Argyll and Bute
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
- Listed buildings and conservation areas can limit changes to how the frame looks. Refurbishment within the existing frame usually avoids those issues and any need for consent.
- Care settings in Argyll and Bute benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
- Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
Automatic door refurbishment in Argyll and Bute: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in Scotland
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Argyll and Bute and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Before replacing an automatic door in Argyll and Bute, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.
Automatic door refurbishment in Argyll and Bute: questions
Can you refurbish a door in Argyll and Bute that another company installed?
Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.
How much should I budget for automatic door refurbishment in Argyll and Bute?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Argyll and Bute confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is it worth refurbishing an old door at our premises in Argyll and Bute?
If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.
Do you set up the door again after refurbishing it in Argyll and Bute?
Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.
How are payments structured for work in Argyll and Bute?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What does the free site survey in Argyll and Bute involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic door refurbishment, with drawings where the door type needs them.
Is a building warrant needed for a new automatic entrance in Argyll and Bute?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.