UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Argyll and Bute

Sensor upgrades and replacement in Bowmore

Has a risk assessment in Bowmore recommended new safety sensors? We can quote for exactly the items it lists, fit them and record the settings and test results, so the report's actions can be signed off.

Town
Bowmore
Area
Argyll and Bute
Postcodes
PA43
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Bowmore and nearby

From shops and surgeries to schools, care homes and private houses, any building in the PA43 postcode district can be covered for sensor upgrades and replacement. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.

Work in Bowmore is carried out by arrangement. Visits are planned around ferry timings, so the engineer arrives with the parts and tools the job is likely to need and makes the most of each trip.

What to think about for sensor upgrades and replacement in Bowmore

  • Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
  • If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
  • Shopping parades and older shopfronts in Bowmore sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
  • Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
  • Care settings in Bowmore often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.

Sensor upgrades and replacement in Bowmore: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. For island addresses, travel is included in the agreed visit price. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Scotland

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

How it works

  1. Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
  2. Agree the price first. Before anyone travels to Bowmore, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
  3. Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
  4. Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.

Send a photo of the door and sensor at your building in Bowmore, and we will confirm the visit price and the likely sensor before booking an engineer.

Sensor upgrades and replacement in Bowmore: questions

Do engineers carry sensors for doors in Bowmore?

Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.

Can you give me a price for sensor upgrades and replacement in Bowmore?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Bowmore, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Can you upgrade sensors on an old door in Bowmore?

Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.

Will you record the sensor settings for our building in Bowmore?

Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.

How soon can an engineer get to Bowmore?

We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.

Which makes of automatic door can you work on in Bowmore?

Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.

Do businesses in Bowmore have to fit automatic doors?

No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.

Next step

Sensor upgrades and replacement in Bowmore

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.