Coverage across Dunbartonshire
For sensor upgrades and replacement anywhere in Dunbartonshire, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of Scotland, 7 in all; if your address sits outside them, the arrangements are exactly the same.
Towns listed in Dunbartonshire: Bearsden, Clydebank, Bishopbriggs, Dumbarton, Kirkintilloch, Milngavie, Alexandria.
What to think about for sensor upgrades and replacement in Dunbartonshire
- Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
- Shopping parades and older shopfronts in Dunbartonshire sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Care settings in Dunbartonshire often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
- After a near miss at a door in Dunbartonshire, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
Sensor upgrades and replacement in Dunbartonshire: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
- Agree the price first. Before anyone travels to Dunbartonshire, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
- Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
- Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.
Send a photo of the door and sensor at your building in Dunbartonshire, and we will confirm the visit price and the likely sensor before booking an engineer.
Sensor upgrades and replacement in Dunbartonshire: questions
Will you record the sensor settings for our building in Dunbartonshire?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
What will sensor upgrades and replacement in Dunbartonshire cost?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Dunbartonshire, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Our door in Dunbartonshire closes on people. Is that a sensor fault?
It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.
Can you upgrade sensors on an old door in Dunbartonshire?
Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.
Which makes of automatic door can you work on in Dunbartonshire?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Are parts quoted before they are fitted?
Always. If a repair or service in Dunbartonshire needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Do businesses in Dunbartonshire have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.