Coverage across Gwent
There is no branch to visit in Gwent; instead, specialist engineers working under our management travel to you. That keeps drive unit replacement available across the whole area, including smaller towns and rural addresses. The page for each of the 14 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in Gwent: Newport, Cwmbran, Pontypool, Ebbw Vale, Caerphilly, Blackwood, Tredegar, Abergavenny, Bargoed, Chepstow, Risca, Abertillery, Monmouth, Caldicot.
What to think about for drive unit replacement in Gwent
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- Listed buildings and conservation areas in Gwent make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
- Hospitals and care homes in Gwent may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
- Doors linked to the fire alarm or access control in Gwent need those links rewired to the new controller. Let us know which systems connect to the door.
Drive unit replacement in Gwent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in Wales
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is drive unit replacement for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Gwent.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tired of repeat breakdowns at your entrance in Gwent? Ask us to compare a new operator with a new door, so you can choose with both prices in front of you.
Drive unit replacement in Gwent: questions
Do you provide paperwork for the converted door in Gwent?
Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.
What is the guide price for drive unit replacement in Gwent?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Gwent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you remove the old operator from our premises in Gwent?
Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.
How long will our entrance in Gwent be closed for the changeover?
A standard sliding door changeover typically takes a day, and a swing operator often less. The work can be scheduled early, after closing or at a weekend so it causes less disruption. Your quote shows the planned date and how long the entrance will be out of use.
Can installation in Gwent happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
What power supply is needed for drive unit replacement in Gwent?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.