UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Drive unit replacement · Gwent

Drive unit replacement in Bargoed

A new drive unit fitted to an existing door in Bargoed comes with new sensors where needed, a set-up tested with reference to BS EN 16005 and the conformity paperwork for the finished door, all priced on a fixed quote.

Town
Bargoed
Area
Gwent
Postcodes
CF81
Guide price
Typically £1,995 to £3,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Bargoed and nearby

Requests for drive unit replacement in Bargoed are handled by us and passed to a specialist engineer working under our management. Coverage includes the CF81 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.

GP surgeries, dental practices and pharmacies in Bargoed often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for drive unit replacement (straight-line distance): Blackwood (1.5 miles), Abertillery (5.3 miles), Tredegar (6.2 miles), Mountain Ash (6.3 miles), Ebbw Vale (6.6 miles), Pontypridd (7.3 miles).

What to think about for drive unit replacement in Bargoed

  • Doors linked to the fire alarm or access control in Bargoed need those links rewired to the new controller. Let us know which systems connect to the door.
  • Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.
  • Listed buildings and conservation areas in Bargoed make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
  • Busy retail entrances in Bargoed may prefer the changeover after closing time or on a quiet trading day. Tell us your hours when you book the survey.
  • Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.

Drive unit replacement in Bargoed: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.

ItemGuide priceNotes
New drive unit on an existing automatic sliding door£1,995 – £3,995existing leaves kept, installed, ex VAT
New operator on an existing automatic swing door£1,795 – £3,995installed, ex VAT
Sensors replaced at the same time£195 – £495per sensor, ex VAT

Standards and rules in Wales

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Bargoed and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on drive unit replacement separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

If parts for your door in Bargoed are obsolete, talk to us before replacing the entrance. A free survey shows what can be kept and what it will cost.

Drive unit replacement in Bargoed: questions

Can you fit a new operator to a door another company installed in Bargoed?

Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.

What price range should I expect for drive unit replacement in Bargoed?

Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Bargoed confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What if the frame of our door in Bargoed is not worth keeping?

Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.

Will you remove the old operator from our premises in Bargoed?

Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.

What happens to the old door when a new one is fitted in Bargoed?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

Can installation in Bargoed happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Do businesses in Bargoed have to fit automatic doors?

There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.

Next step

Drive unit replacement in Bargoed

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.