Coverage across Perth and Kinross
Multi-site organisations in Perth and Kinross, such as councils, housing providers, schools and health providers, can arrange automatic door repairs for every building through one contact. Each site gets its own written price and its own record. Smaller customers, from corner shops to private homes, follow exactly the same process. The towns we list here, 3 in all, appear below.
Towns listed in Perth and Kinross: Perth, Blairgowrie, Crieff.
What to think about for automatic door repairs in Perth and Kinross
- Glass damage needs prompt action to keep people safe. Switch the door off, keep people back from the broken leaf and tape or board the glass if that can be done safely.
- A door with battery backup may show a fault, or fail to open in a power cut, when its battery is worn out. Batteries are a routine replacement part rather than a major repair.
- Doors knocked by trolleys, pushchairs or deliveries often go out of line. Repeated impacts damage rollers and floor guides, so it helps to know roughly when the fault first appeared.
- Wet and windy weather causes many false openings. Sensors over exposed entrances can react to rain and blowing leaves, and a small change to the detection zone often cures it.
- Leisure centres, schools and public buildings in Perth and Kinross may need a contractor induction or permit before work starts. Send any site rules with your booking so the visit can go ahead first time.
Automatic door repairs in Perth and Kinross: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
- Agree the price first. Before anyone travels to Perth and Kinross, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
- Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
- Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.
Send us a photo of the faulty door and its operator label in Perth and Kinross. We will confirm the visit price in writing and offer the earliest engineer visit available.
Automatic door repairs in Perth and Kinross: questions
Do engineers carry spare parts for doors in Perth and Kinross?
Engineers carry common parts such as sensors, belts and some rollers. Controllers, motors and parts for less common doors are ordered once the fault is confirmed, and delivery is typically 1 to 3 weeks. Knowing the make and model in advance improves the chance of a repair during the first visit.
What will automatic door repairs in Perth and Kinross cost?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Perth and Kinross, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you repair revolving doors in Perth and Kinross?
Yes. The engineers we send work on automatic and manual revolving doors as well as sliding and swing doors. Revolving doors have extra safety devices, such as stop buttons and edge sensors, which are all tested after a repair. Parts for some revolving doors take longer to source, so photos of the drive and control panel help us prepare.
Do you keep records of repairs for buildings in Perth and Kinross?
Yes. Each visit produces a written report of the fault found, the work done and any parts fitted or recommended. Facilities teams can keep these with the door's service records, which helps show the door is being maintained and makes repeat faults easier to trace.
Can visits in Perth and Kinross be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
How often should automatic doors in Perth and Kinross be serviced?
No law sets a fixed interval. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Site staff should also carry out simple regular checks and keep a record of them.
Who is responsible for automatic doors on escape routes in Perth and Kinross?
The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.