Coverage across Perth and Kinross
For safety inspections and risk assessments anywhere in Perth and Kinross, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of Scotland, 3 in all; if your address sits outside them, the arrangements are exactly the same.
Towns listed in Perth and Kinross: Perth, Blairgowrie, Crieff.
What to think about for safety inspections and risk assessments in Perth and Kinross
- If the use of a building has changed, for example a unit in Perth and Kinross that has become a clinic or a gym, the door's original set-up may no longer suit its users.
- Retail entrances in Perth and Kinross with heavy footfall can have sensors knocked out of alignment over time. The inspection checks that detection still covers the full closing edge.
- Programme switches left in the wrong mode cause many incidents. The inspection checks the switch is secure, labelled and set correctly for each time of day.
- Care homes and hospitals in Perth and Kinross have users who move slowly or unpredictably. The inspection pays close attention to sensor coverage and door speeds where frail or confused people pass through.
- Power failure behaviour is easy to overlook. The inspection tests what the door does when the mains supply or battery fails, which matters most on escape routes.
Safety inspections and risk assessments in Perth and Kinross: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Share the details. Send the address in Perth and Kinross, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Start with a clear picture of your automatic doors in Perth and Kinross. Arrange an inspection and receive ranked findings you can plan and budget around.
Safety inspections and risk assessments in Perth and Kinross: questions
Do we have to use you for the upgrades the inspection recommends in Perth and Kinross?
No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.
What will safety inspections and risk assessments in Perth and Kinross cost?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Perth and Kinross, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
What if a door in Perth and Kinross is found to be unsafe?
The engineer explains the problem before leaving and may recommend switching the door to a safer mode until it is fixed. High-priority findings are flagged at the top of the report. We can quote the repair or upgrade straight away, or you can arrange it with another competent installer.
How often should doors in Perth and Kinross be risk assessed?
There is no set legal frequency. Most owners assess each door once, then repeat the assessment when the door is altered, when the people using it change or after an incident. In between, regular servicing keeps the safety functions checked, which in our view should happen at least once a year.
What if a door in Perth and Kinross is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
What should I tell you when reporting a fault in Perth and Kinross?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
Is a building warrant needed for a new automatic entrance in Perth and Kinross?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.