Coverage across Oxfordshire
Our coverage of Oxfordshire is not tied to a depot or a showroom. Engineers who carry out drive unit replacement for us travel to each site, so a farm shop down a country lane goes through the same process as a city-centre office. Every job is priced in writing before work starts, and the town list below currently numbers 6.
Towns listed in Oxfordshire: Oxford, Banbury, Abingdon, Bicester, Didcot, Witney.
What to think about for drive unit replacement in Oxfordshire
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
- Older shopfronts in Oxfordshire may have headers made for discontinued operators. Adapter plates usually allow a new drive unit to fit, which the survey confirms before you commit.
- Listed buildings and conservation areas in Oxfordshire make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
- Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.
- Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
Drive unit replacement in Oxfordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for drive unit replacement and book a survey in Oxfordshire.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Keep the frame, replace the drive. Arrange a free survey in Oxfordshire and receive a fixed quote covering the new operator, sensors and paperwork.
Drive unit replacement in Oxfordshire: questions
Can you fit a new operator to a door another company installed in Oxfordshire?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
How much should I budget for drive unit replacement in Oxfordshire?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Oxfordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long will our entrance in Oxfordshire be closed for the changeover?
A standard sliding door changeover typically takes a day, and a swing operator often less. The work can be scheduled early, after closing or at a weekend so it causes less disruption. Your quote shows the planned date and how long the entrance will be out of use.
What if the frame of our door in Oxfordshire is not worth keeping?
Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.
Is there a warranty on drive unit replacement?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Can automatic doors be fitted to a listed building in Oxfordshire?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Which building regulations apply to a new automatic entrance in Oxfordshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.