Coverage across Buckinghamshire
Not every part of Buckinghamshire is easy to reach, and some sites need planning around access, parking or opening hours. We take that into account when arranging drive unit replacement, and the engineer, working under our management, arrives with what the job is likely to need. The towns below, 9 in all, each have their own page, but any address in the area can be covered.
Towns listed in Buckinghamshire: Milton Keynes, High Wycombe, Aylesbury, Bletchley, Amersham, Chesham, Gerrards Cross, Chalfont St Peter, Marlow.
What to think about for drive unit replacement in Buckinghamshire
- Older shopfronts in Buckinghamshire may have headers made for discontinued operators. Adapter plates usually allow a new drive unit to fit, which the survey confirms before you commit.
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- Busy retail entrances in Buckinghamshire may prefer the changeover after closing time or on a quiet trading day. Tell us your hours when you book the survey.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
- Hospitals and care homes in Buckinghamshire may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
Drive unit replacement in Buckinghamshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for drive unit replacement and book a survey in Buckinghamshire.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
If parts for your door in Buckinghamshire are obsolete, talk to us before replacing the entrance. A free survey shows what can be kept and what it will cost.
Drive unit replacement in Buckinghamshire: questions
How long will our entrance in Buckinghamshire be closed for the changeover?
A standard sliding door changeover typically takes a day, and a swing operator often less. The work can be scheduled early, after closing or at a weekend so it causes less disruption. Your quote shows the planned date and how long the entrance will be out of use.
Can you give me a price for drive unit replacement in Buckinghamshire?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Buckinghamshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What lead time should we expect in Buckinghamshire?
Once the quote is accepted, drive units are typically 2 to 4 weeks to arrive, depending on the length and weight rating needed. The changeover date is agreed with you as soon as the parts are confirmed, and it can be planned around your opening hours.
Can the replacement in Buckinghamshire include a service plan?
It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.
How are payments structured for work in Buckinghamshire?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What power supply is needed for drive unit replacement in Buckinghamshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Buckinghamshire have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.