Covering Witney and nearby
Addresses anywhere in the OX28 and OX29 postcode districts can book drive unit replacement through us. The engineer who attends works under our management and travels to the site. There is no branch in Witney, so the price, the booking and the paperwork all come from one place.
Doors at quieter sites in Witney and elsewhere in Oxfordshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for drive unit replacement (straight-line distance): Oxford (10.0 miles), Abingdon (11.6 miles), Didcot (15.9 miles), Bicester (16.3 miles), Swindon (20.1 miles), Banbury (20.3 miles).
What to think about for drive unit replacement in Witney
- Worn floor guides and rollers can shorten the life of a new operator. It is often worth replacing them during the same visit rather than coming back later.
- Ask for the paperwork. A converted door should come with its risk assessment, Declaration of Conformity and user instructions, which belong with your building and maintenance records.
- Business parks and office blocks in Witney with several identical doors can replace operators in phases, keeping at least one entrance open at all times.
- Doors linked to the fire alarm or access control in Witney need those links rewired to the new controller. Let us know which systems connect to the door.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
Drive unit replacement in Witney: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Describe what you need. Whether the job is drive unit replacement for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Witney.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Send the make and model from the operator cover of your door in Witney, and we will arrange a survey at no cost for a replacement drive unit.
Drive unit replacement in Witney: questions
Can the replacement in Witney include a service plan?
It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.
What do you charge for drive unit replacement in Witney?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Witney confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if the frame of our door in Witney is not worth keeping?
Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.
Will you remove the old operator from our premises in Witney?
Yes. The old drive unit, sensors and any other replaced parts are taken away as part of the job, and the work area is left clean. Disposal is included in the fixed quote, so there is nothing extra to arrange or pay for afterwards.
How much disruption should we expect while the work is done in Witney?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What power supply is needed for drive unit replacement in Witney?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Witney?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.