Coverage across Orkney, Shetland and the Western Isles
Booking safety and compliance upgrades in Orkney, Shetland and the Western Isles does not depend on being close to a particular town. Engineers working under our management travel throughout the area, and nothing goes ahead until the price has been agreed in writing. Below are the towns we list here, 4 at present, each linking to a page with nearby places and guide prices.
Towns listed in Orkney, Shetland and the Western Isles: Stornoway, Kirkwall, Lerwick, Stromness.
What to think about for safety and compliance upgrades in Orkney, Shetland and the Western Isles
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- Older shopfronts in Orkney, Shetland and the Western Isles often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- If your building in Orkney, Shetland and the Western Isles has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
Safety and compliance upgrades in Orkney, Shetland and the Western Isles: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. For island addresses the survey is still free; travel and accommodation for the installation itself are shown as a separate line in the quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in Scotland
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Orkney, Shetland and the Western Isles and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Need battery backup, safety sensors or side-screen guarding in Orkney, Shetland and the Western Isles? Get in touch for a survey at no cost and a fixed price.
Safety and compliance upgrades in Orkney, Shetland and the Western Isles: questions
Is it cheaper to upgrade or replace our old door in Orkney, Shetland and the Western Isles?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
What is the guide price for safety and compliance upgrades in Orkney, Shetland and the Western Isles?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Orkney, Shetland and the Western Isles confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you need an inspection before upgrading a door in Orkney, Shetland and the Western Isles?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
How long do upgrades take at premises in Orkney, Shetland and the Western Isles?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
What do you need from us for parking and access in Orkney, Shetland and the Western Isles?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Can automatic doors be fitted to a listed building in Orkney, Shetland and the Western Isles?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Orkney, Shetland and the Western Isles?
The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.