Coverage across Kent
Multi-site organisations in Kent, such as councils, housing providers, schools and health providers, can arrange touch-free and push-button activation for every building through one contact. Each site gets its own written price and its own record. Smaller customers, from corner shops to private homes, follow exactly the same process. The towns we list here, 24 in all, appear below.
Towns listed in Kent: Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford, Canterbury, Sittingbourne, Gravesend, Dartford, Ramsgate, Dover, Tonbridge, Strood, Whitstable, Deal, Sevenoaks, Rochester, Herne Bay, Northfleet, Broadstairs, Faversham, Swanley.
What to think about for touch-free and push-button activation in Kent
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Washrooms and accessible toilets in Kent need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
Touch-free and push-button activation in Kent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Kent.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Make the doors at your premises in Kent easier and more hygienic to use. Start with a free survey of how each door is opened now.
Touch-free and push-button activation in Kent: questions
Can you add touch-free switches to our automatic doors in Kent?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
What price range should I expect for touch-free and push-button activation in Kent?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Kent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does it take to fit activation devices in Kent?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
Do you fit door controls for homes in Kent?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Kent. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
Do I need permission from a landlord or the council before work in Kent?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What do you need from us for parking and access in Kent?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Who is responsible for automatic doors on escape routes in Kent?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.