Covering Herne Bay and nearby
Addresses anywhere in the CT6 postcode district can book touch-free and push-button activation through us. The engineer who attends works under our management and travels to the site. There is no branch in Herne Bay, so the price, the booking and the paperwork all come from one place.
Many buildings in Herne Bay are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Whitstable (4.5 miles), Canterbury (6.8 miles), Faversham (11.1 miles), Margate (11.1 miles), Ramsgate (12.8 miles), Broadstairs (13.6 miles).
What to think about for touch-free and push-button activation in Herne Bay
- Washrooms and accessible toilets in Herne Bay need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Shops on high streets in Herne Bay may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Clinics and surgeries in Herne Bay often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Car parks and drop-off points in Herne Bay benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
Touch-free and push-button activation in Herne Bay: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for touch-free and push-button activation in Herne Bay, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Make the doors at your premises in Herne Bay easier and more hygienic to use. Start with a free survey of how each door is opened now.
Touch-free and push-button activation in Herne Bay: questions
Can you move a push pad that is in the wrong place at our building in Herne Bay?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Is there a guide price for touch-free and push-button activation in Herne Bay?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Herne Bay confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our door in Herne Bay keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Can wave switches in Herne Bay be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Can automatic doors be fitted to a listed building in Herne Bay?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do I need permission from a landlord or the council before work in Herne Bay?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Who is responsible for automatic doors on escape routes in Herne Bay?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.