Covering Faversham and nearby
Our coverage of Faversham takes in the ME13 postcode district and the neighbouring parts of Kent. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about touch-free and push-button activation and we will confirm the arrangements and the price in writing.
Libraries, health centres and council buildings in Faversham still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Whitstable (6.7 miles), Sittingbourne (7.0 miles), Canterbury (8.6 miles), Herne Bay (11.1 miles), Ashford (11.6 miles), Gillingham (15.5 miles).
What to think about for touch-free and push-button activation in Faversham
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Car parks and drop-off points in Faversham benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
Touch-free and push-button activation in Faversham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Faversham.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Tell us which doors need better controls at your building in Faversham, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Faversham: questions
Our door in Faversham keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Is there a guide price for touch-free and push-button activation in Faversham?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Faversham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does it take to fit activation devices in Faversham?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
Do touch-free switches work in cold or wet weather in Faversham?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
What happens once the installation in Faversham is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What is the lead time for touch-free and push-button activation in Faversham?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Faversham?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.