Coverage across Shropshire
We treat Shropshire as one service area for revolving doors, so a site on the edge of the area gets the same written pricing and the same standard of work as one in the busiest town centre. Specialist automatic door engineers working under our management carry out each visit. Choose from the 4 towns below, or contact us with any address.
Towns listed in Shropshire: Telford, Shrewsbury, Wellington, Oswestry.
What to think about for revolving doors in Shropshire
- Tall buildings in Shropshire can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Busy reception areas in Shropshire may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- Hotel entrances in Shropshire see guests with large cases and families with pushchairs. A larger three-wing automatic door and a clearly signed pass door keep the flow moving.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Shropshire, and confirm dates before booking floor layers or shopfitters.
Revolving doors in Shropshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Shropshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Planning a new reception in Shropshire? Contact us early, so the revolving door, pass door and canopy fit your programme.
Revolving doors in Shropshire: questions
Who services a revolving door in Shropshire after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
Can you give me a price for revolving doors in Shropshire?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Shropshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our reception in Shropshire stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
How long does a revolving door project in Shropshire take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Is there a warranty on revolving doors?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
How do you make sure the door works for disabled visitors in Shropshire?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Do businesses in Shropshire have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.