Coverage across Shropshire
Break-out escape route doors across Shropshire follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 4 towns we list, each with its own page, nearby places and guide prices.
Towns listed in Shropshire: Telford, Shrewsbury, Wellington, Oswestry.
What to think about for break-out escape route doors in Shropshire
- Shopping centre units in Shropshire usually need landlord approval for a new entrance and for any fire alarm connection. Ask centre management for their fit-out rules early, as they often set working hours and contractor requirements.
- Entrances facing the prevailing wind can have break-out leaves pushed by strong gusts. The break-out fittings and the door's wind settings are chosen at survey to suit how exposed the entrance is.
- Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
- Older entrances on high streets in Shropshire may have uneven thresholds or sloping pavements. Break-out leaves need a level floor and solid fixing for the bottom pivots, and correcting that can add a day to the work.
- Listed buildings and conservation areas in Shropshire may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
Break-out escape route doors in Shropshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Shropshire.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ask for a free survey of your escape route entrance in Shropshire. You will get a fixed quote, and nothing is ordered until you accept it.
Break-out escape route doors in Shropshire: questions
Can you work with our fire risk assessor in Shropshire?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
What is the guide price for break-out escape route doors in Shropshire?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Shropshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you look after break-out doors in Shropshire once they are fitted?
Yes. We can arrange planned servicing, with the break-out fittings, alarm release and power failure behaviour tested at each visit and a written record left on site. Each visit is priced in writing before anyone attends, and the interval is set by how hard the door works.
Do you install break-out sliding doors in Shropshire?
Yes. We arrange surveys and installations in Shropshire through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
What power supply is needed for break-out escape route doors in Shropshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
How much disruption should we expect while the work is done in Shropshire?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Who is responsible for automatic doors on escape routes in Shropshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.