Coverage across Herefordshire
We treat Herefordshire as one service area for revolving doors, so a site on the edge of the area gets the same written pricing and the same standard of work as one in the busiest town centre. Specialist automatic door engineers working under our management carry out each visit. Choose from the 3 towns below, or contact us with any address.
Towns listed in Herefordshire: Hereford, Leominster, Ross-on-Wye.
What to think about for revolving doors in Herefordshire
- Tall buildings in Herefordshire can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- Listed buildings and conservation areas in Herefordshire may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- Some visitors to buildings in Herefordshire find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Herefordshire, and confirm dates before booking floor layers or shopfitters.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
Revolving doors in Herefordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Herefordshire.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send photos and any drawings of the entrance in Herefordshire, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in Herefordshire: questions
Will a revolving door in Herefordshire work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
What price range should I expect for revolving doors in Herefordshire?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Herefordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need a pass door beside a revolving door in Herefordshire?
In practice, yes. A revolving door is not accessible on its own, so an accessible powered swing or sliding door should be provided alongside for wheelchair users, pushchairs, deliveries and anyone who needs it. It also usually forms part of the escape strategy. We design and quote both together.
Can our reception in Herefordshire stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
What power supply is needed for revolving doors in Herefordshire?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do you service doors in Herefordshire after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Herefordshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.