Covering Telford and nearby
We cover the whole of the TF2, TF3, TF4, TF5, TF7 and TF8 postcode districts, along with nearby towns in Shropshire. You book each visit for revolving doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Shopping centre and transport entrances in Telford are often on escape routes, so doors there are usually break-out or fail-safe types set up to match the fire strategy for the building. Any work on them is planned with the building's management so the route stays usable.
Nearby towns we also list for revolving doors (straight-line distance): Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles), Wednesfield (16.2 miles), Stafford (16.5 miles), Sedgley (16.6 miles).
What to think about for revolving doors in Telford
- Busy reception areas in Telford may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- Night security needs thought. Decide whether the wings will lock across the drum or a night shield is needed, and how the pass door and any shutters will be secured.
- Listed buildings and conservation areas in Telford may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Telford, with clear signs.
Revolving doors in Telford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Telford and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey in Telford to compare manual and automatic revolving doors, with drawings and one fixed, itemised quote.
Revolving doors in Telford: questions
Who services a revolving door in Telford after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
How much should I budget for revolving doors in Telford?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Telford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a revolving door in Telford work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
How long does a revolving door project in Telford take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
What does the free site survey in Telford involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for revolving doors, with drawings where the door type needs them.
Do I need permission from a landlord or the council before work in Telford?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Which building regulations apply to a new automatic entrance in Telford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.