Coverage across Leicestershire
For frameless glass automatic doors anywhere in Leicestershire, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of England, 8 in all; if your address sits outside them, the arrangements are exactly the same.
Towns listed in Leicestershire: Leicester, Loughborough, Hinckley, Coalville, Wigston, Melton Mowbray, Market Harborough, Oadby.
What to think about for frameless glass automatic doors in Leicestershire
- Power has to reach the operator above the door. In glass partitions there may be nowhere to hide a cable, so plan the route through the ceiling or a slim trunking from the start.
- Showrooms in Leicestershire with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- Listed interiors and heritage buildings in Leicestershire sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
- Cleaning staff at busy venues in Leicestershire should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
Frameless glass automatic doors in Leicestershire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for frameless glass automatic doors in Leicestershire, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Use the guide price tool for an early figure, then let us survey your showroom, studio or reception in Leicestershire.
Frameless glass automatic doors in Leicestershire: questions
Can a frameless door in Leicestershire match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
What is the guide price for frameless glass automatic doors in Leicestershire?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Leicestershire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need building approval for a frameless door in Leicestershire?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
How long does fitting take in Leicestershire?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
Can automatic doors be fitted to a listed building in Leicestershire?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do you service doors in Leicestershire after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Leicestershire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.