Covering Market Harborough and nearby
Engineers working under our management travel to addresses across the LE16 postcode district for frameless glass automatic doors. There is no depot or showroom in Market Harborough; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Small offices, community centres and village halls around Market Harborough tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Corby (9.8 miles), Kettering (9.9 miles), Wigston (10.2 miles), Oadby (11.2 miles), Uppingham (11.3 miles), Leicester (14.2 miles).
What to think about for frameless glass automatic doors in Market Harborough
- The header needs a rigid fixing. In modern offices in Market Harborough with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Glass partitions in office buildings across Leicestershire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- Street-facing doors in Market Harborough that take the full force of wind and rain may be better as framed sliding doors. Frameless leaves have small gaps that let draughts and noise through.
Frameless glass automatic doors in Market Harborough: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is frameless glass automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Market Harborough.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Planning an office fit-out in Market Harborough? Share your partition drawings and we will quote for frameless glass automatic doors to match, with a fixed, itemised price.
Frameless glass automatic doors in Market Harborough: questions
What should we do if the frameless door in Market Harborough is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
Can you give me a price for frameless glass automatic doors in Market Harborough?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Market Harborough confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does fitting take in Market Harborough?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
Can a frameless door in Market Harborough match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
What happens once the installation in Market Harborough is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Can installation in Market Harborough happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Which building regulations apply to a new automatic entrance in Market Harborough?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.