Coverage across Kent
Here is how coverage works in Kent. You contact us with the address and what the door needs, we confirm the price in writing, and a specialist engineer working under our management attends on an agreed date. That applies to safety and compliance upgrades at a single shop door or across a whole estate of buildings, in any of the towns below or between them.
Towns listed in Kent: Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford, Canterbury, Sittingbourne, Gravesend, Dartford, Ramsgate, Dover, Tonbridge, Strood, Whitstable, Deal, Sevenoaks, Rochester, Herne Bay, Northfleet, Broadstairs, Faversham, Swanley.
What to think about for safety and compliance upgrades in Kent
- Older shopfronts in Kent often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Listed buildings and conservation areas in Kent may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
Safety and compliance upgrades in Kent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Kent and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us your inspection report for doors in Kent, and we will arrange a free survey and quote each upgrade as a separate item.
Safety and compliance upgrades in Kent: questions
How long do upgrades take at premises in Kent?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
How are prices worked out for safety and compliance upgrades in Kent?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Kent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you carry out automatic door safety upgrades in Kent?
Yes. We quote and manage upgrade work in Kent, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Do you need an inspection before upgrading a door in Kent?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
Can installation in Kent happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
How are payments structured for work in Kent?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Do businesses in Kent have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.