Covering Exeter and nearby
Our coverage of Exeter takes in the EX1, EX2 and EX4 postcode districts and the neighbouring parts of Devon. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic door refurbishment and we will confirm the arrangements and the price in writing.
Weather matters for entrances that face open car parks, which is common on retail and business parks around Exeter and elsewhere in Devon. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Exmouth (9.2 miles), Tiverton (12.4 miles), Newton Abbot (14.0 miles), Torquay (18.1 miles), Paignton (20.0 miles), Taunton (27.3 miles).
What to think about for automatic door refurbishment in Exeter
- Office blocks and business parks in Exeter with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
- Floors around the door in Exeter may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
- Busy retail units in Exeter may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
- After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
Automatic door refurbishment in Exeter: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Exeter and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us photos of the door that needs attention in Exeter, and we will arrange a survey at no cost and an itemised quote for the work.
Automatic door refurbishment in Exeter: questions
Can you refinish the frame of our door in Exeter?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
What price range should I expect for automatic door refurbishment in Exeter?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Exeter confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you refurbish a door in Exeter that another company installed?
Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.
Can you replace a single broken glass leaf in Exeter?
Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.
How are payments structured for work in Exeter?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Exeter is agreed before work starts.
Do businesses in Exeter have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.