Coverage across Wiltshire
Wherever you are in Wiltshire, we need the same three things to get started on accessible door operators: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 7 in total.
Towns listed in Wiltshire: Swindon, Salisbury, Trowbridge, Chippenham, Melksham, Warminster, Calne.
What to think about for accessible door operators in Wiltshire
- GP surgeries and clinics in Wiltshire often want the main entrance and the accessible toilet done together. Pricing both at one survey saves a second visit and keeps the controls consistent.
- Older public buildings in Wiltshire often have heavy timber doors on worn hinges. Fixing the hinges and the way the door hangs before the operator goes on gives a smoother, longer-lasting result.
- Glazed doors in shop fronts and offices in Wiltshire need visible push pads and clear markings on the glass, so people with sight loss can find the pad and see where the door is.
- If the door is a fire door, find its rating or records before the survey. Fixings and cabling must respect the rating, and the operator must release the door on the fire alarm.
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
Accessible door operators in Wiltshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for accessible door operators in Wiltshire, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Book a free survey for the door that is causing problems in Wiltshire, and we will send a fixed, itemised quote for an accessible operator and push pads.
Accessible door operators in Wiltshire: questions
Can the operator be serviced after installation in Wiltshire?
Yes. We can arrange visits where the speed, force, safety settings, push pads and closer are checked and a written record is left. You agree the cost of each visit in writing beforehand, and how often we come depends on how much the door is used.
What will accessible door operators in Wiltshire cost?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Wiltshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who will fit the operator at our building in Wiltshire?
The engineer will be a specialist working under our management. We are the contracting party, so the quote, the warranty terms and any follow-up all come through us. Before handover, the door is set up, tested and documented with reference to BS EN 16005.
Can you fit an accessible operator to a door at our surgery in Wiltshire?
Yes, in most cases. We check the door, hinges, frame and the wall above at a free survey, then quote a fixed price for the operator, push pads and any repairs needed first. Fitting usually takes half a day to a day per door, planned around your opening hours.
What happens once the installation in Wiltshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
How much disruption should we expect while the work is done in Wiltshire?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Which building regulations apply to a new automatic entrance in Wiltshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.