Coverage across Oxfordshire
From large town centres to quiet villages, entrances across Oxfordshire vary a great deal, and the right approach to accessible door operators varies with them. A surgery door used by patients with walking frames needs different settings from a supermarket entrance, so the engineer looks at the actual door first. The towns we list in this area currently number 6.
Towns listed in Oxfordshire: Oxford, Banbury, Abingdon, Bicester, Didcot, Witney.
What to think about for accessible door operators in Oxfordshire
- Offices and shared buildings in Oxfordshire often have doors used by both staff and visitors. Power assist for everyday use, with a push pad for those who need full opening, keeps the door easy for everyone.
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
- Check how heavy the door is to push now. If the closer is set very strong for fire or wind reasons, the operator has to be chosen to suit, and the closer may need adjusting.
- Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
- Older public buildings in Oxfordshire often have heavy timber doors on worn hinges. Fixing the hinges and the way the door hangs before the operator goes on gives a smoother, longer-lasting result.
Accessible door operators in Oxfordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for accessible door operators and book a survey in Oxfordshire.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Get the door at your premises in Oxfordshire opening at the press of a pad. Start with a free survey and a fixed written quote.
Accessible door operators in Oxfordshire: questions
Do you fit operators to accessible toilets in Oxfordshire?
Yes. An accessible toilet usually needs a low-energy operator, push pads inside and out, a lock button that stops the door opening from outside while in use, and an emergency release for staff. We price the full kit, test it with your staff and leave the settings in writing.
How are prices worked out for accessible door operators in Oxfordshire?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Oxfordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How soon can an operator be fitted at our premises in Oxfordshire?
Lead time is typically 2 to 4 weeks from accepting the quote, depending on the operator and any parts the door needs. We give the expected lead time in writing with the quote, and agree the fitting date with you once the parts are ready.
Our building in Oxfordshire is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
How do you make sure the door works for disabled visitors in Oxfordshire?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Oxfordshire is agreed before work starts.
Which building regulations apply to a new automatic entrance in Oxfordshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.