Covering Bolton and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BL1, BL2 and BL3 postcode districts can be covered for telescopic sliding doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Town-centre buildings in Bolton range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Farnworth (2.7 miles), Westhoughton (4.4 miles), Radcliffe (4.7 miles), Atherton (4.8 miles), Walkden (4.8 miles), Horwich (4.9 miles).
What to think about for telescopic sliding doors in Bolton
- Care homes and supported living buildings in Bolton may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- Shop units in Bolton that trade late or open early may want installation outside trading hours. Early starts and weekend work can usually be arranged and are shown as a separate line in the quote.
- Entrances used by ambulances and patient transport in Bolton benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- If the entrance is on an escape route, ask your fire risk assessor what the door must do before ordering. Break-out telescopic leaves have to be chosen at the start, because they cannot be added afterwards.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
Telescopic sliding doors in Bolton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Bolton and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on telescopic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Short of side space but need a wide entrance in Bolton? Get in touch and we will show you the clear opening a telescopic door can give.
Telescopic sliding doors in Bolton: questions
Can our existing sliding door in Bolton be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What is the guide price for telescopic sliding doors in Bolton?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Bolton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the telescopic door survey in Bolton really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
How much wider will our entrance in Bolton be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Bolton shows the exact clear width before you commit.
What does the written quote for telescopic sliding doors in Bolton include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What should I send before the survey in Bolton?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for telescopic sliding doors together more easily.
Which building regulations apply to a new automatic entrance in Bolton?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.