Covering Bolton and nearby
If your building is in Bolton, or anywhere in the BL1, BL2 and BL3 postcode districts, we can arrange automatic swing doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Town-centre buildings in Bolton range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for automatic swing doors (straight-line distance): Farnworth (2.7 miles), Westhoughton (4.4 miles), Radcliffe (4.7 miles), Atherton (4.8 miles), Walkden (4.8 miles), Horwich (4.9 miles).
What to think about for automatic swing doors in Bolton
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Hospital and care home corridors in Bolton need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Doors on escape routes in Bolton usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
- Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
Automatic swing doors in Bolton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Bolton and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic swing doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Use the guide price tool for a quick figure, then let us survey the doors in Bolton and fix the price in writing.
Automatic swing doors in Bolton: questions
Can you fit automatic swing door operators in Bolton?
Yes. We arrange supply and installation of swing operators for doors in Bolton and throughout Greater Manchester. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
What do you charge for automatic swing doors in Bolton?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bolton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the survey for swing doors in Bolton free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
Can our existing doors in Bolton be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
What does the written quote for automatic swing doors in Bolton include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What does the free site survey in Bolton involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic swing doors, with drawings where the door type needs them.
Who is responsible for automatic doors on escape routes in Bolton?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.