Covering Atherton and nearby
Coverage for telescopic sliding doors runs across the M46 postcode district and out into the surrounding parts of Greater Manchester. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Independent businesses in Atherton often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Tyldesley (1.3 miles), Westhoughton (2.2 miles), Leigh (2.2 miles), Hindley (3.7 miles), Walkden (3.9 miles), Farnworth (4.2 miles).
What to think about for telescopic sliding doors in Atherton
- Shop units in Atherton that trade late or open early may want installation outside trading hours. Early starts and weekend work can usually be arranged and are shown as a separate line in the quote.
- Medical centres in Atherton often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
- Care homes and supported living buildings in Atherton may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- A telescopic header is deeper than a standard one. In older buildings in Atherton with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Entrances used by ambulances and patient transport in Atherton benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
Telescopic sliding doors in Atherton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is telescopic sliding doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Atherton.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Ready to widen the way in at your building in Atherton? Arrange a free survey and receive a fixed written quote with no obligation attached.
Telescopic sliding doors in Atherton: questions
Can our existing sliding door in Atherton be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What price range should I expect for telescopic sliding doors in Atherton?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Atherton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need to close our building in Atherton while the door is fitted?
Usually not for long. Most telescopic entrances take one to two days on site, and the opening can be secured overnight. Where the entrance is the only way in, we plan the work around your hours, use another entrance if there is one, or work early or at weekends, with any extra cost shown in the quote.
Can you fit telescopic sliding doors in Atherton?
Yes. We arrange supply and installation in Atherton and the rest of Greater Manchester. Specialist automatic door engineers working under our management carry out the survey and the fitting, and we stay the contracting party throughout, so one company is responsible for the drawing, the quote, the installation and the handover paperwork.
Do you service doors in Atherton after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What happens once the installation in Atherton is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Atherton?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.