Covering Bolton and nearby
Addresses anywhere in the BL1, BL2 and BL3 postcode districts can book automatic sliding doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Bolton, so the price, the booking and the paperwork all come from one place.
Health centres, GP surgeries and clinics around Bolton need doors that open gently and stay open long enough for patients using walking aids or wheelchairs. Low-energy operators, push pads and careful sensor set-up matter more here than sheer speed.
Nearby towns we also list for automatic sliding doors (straight-line distance): Farnworth (2.7 miles), Westhoughton (4.4 miles), Radcliffe (4.7 miles), Atherton (4.8 miles), Walkden (4.8 miles), Horwich (4.9 miles).
What to think about for automatic sliding doors in Bolton
- Where a building in Bolton is listed or sits in a conservation area, a new entrance may need consent first. Slim frames, a colour matched to the existing shopfront and careful drawings can all help an application.
- Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
- Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
- A sloping pavement or uneven threshold in front of a door in Bolton can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Schools, libraries and council buildings often prefer installation during holidays or at weekends. That is usually possible, as long as the dates are known when the order is placed and the door can be made in time.
Automatic sliding doors in Bolton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bolton.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ready to replace a heavy door in Bolton? Tell us the width, the type of building and how busy it gets, and we will take it from there.
Automatic sliding doors in Bolton: questions
Can the old door in Bolton be removed and taken away?
Yes. Removal of the existing door and frame is listed as a line in the quote, along with making good around the opening. Glass and aluminium are taken away for recycling where possible. If the old door belongs to a landlord, tell us at survey so its removal can be agreed with them before the work is booked.
Is there a guide price for automatic sliding doors in Bolton?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Bolton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit a sliding door in Bolton outside our opening hours?
Usually, yes. Many shops and surgeries prefer an early start, an evening or a weekend so the entrance stays open during trading. Out-of-hours work is shown as a separate line in the quote, so you can compare it with a weekday installation and choose whichever suits the business better.
Do you install automatic sliding doors in Bolton?
Yes. We arrange supply and installation throughout Greater Manchester, with the work carried out by specialist automatic door engineers working under our management who travel to the site for the survey and the fitting. You deal with one contracting party from quote to handover, and the same arrangement can cover servicing afterwards if you want it.
What happens once the installation in Bolton is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do you service doors in Bolton after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Do businesses in Bolton have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.