UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Telescopic sliding doors · Clwyd

Telescopic sliding doors in Mold

Replacing an existing sliding entrance in Mold with a telescopic one is a common way to widen the way in without structural work. We measure the frame, check the header and floor, and give you a fixed price for the whole changeover, including removal of the old door.

Town
Mold
Area
Clwyd
Postcodes
CH7
Guide price
From £6,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Mold and nearby

Coverage for telescopic sliding doors runs across the CH7 postcode district and out into the surrounding parts of Clwyd. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Parking on a busy high street can be tight. When work is booked in Mold, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for telescopic sliding doors (straight-line distance): Buckley (2.4 miles), Connah's Quay (4.9 miles), Flint (5.4 miles), Wrexham (10.4 miles), Chester (10.5 miles), Heswall (11.3 miles).

What to think about for telescopic sliding doors in Mold

  • Care homes and supported living buildings in Mold may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
  • Entrances across Clwyd that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
  • Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
  • Entrances used by ambulances and patient transport in Mold benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
  • Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.

Telescopic sliding doors in Mold: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.

ItemGuide priceNotes
Telescopic single-slide, two leaves£6,995 – £9,995installed, ex VAT
Telescopic bi-parting, four leaves£8,995 – £13,995installed, ex VAT
Very wide or full-height openingsPriced on surveymeasured and designed at the survey
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in Wales

Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Mold and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on telescopic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Book a free site survey in Mold, and an engineer will measure the opening and send a drawing with a fixed, itemised quote for telescopic sliding doors.

Telescopic sliding doors in Mold: questions

Is the telescopic door survey in Mold really free?

Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.

How much should I budget for telescopic sliding doors in Mold?

Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Mold confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How much wider will our entrance in Mold be with telescopic doors?

As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Mold shows the exact clear width before you commit.

Can our existing sliding door in Mold be converted to telescopic?

Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.

What does the free site survey in Mold involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for telescopic sliding doors, with drawings where the door type needs them.

What does the written quote for telescopic sliding doors in Mold include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Are the rules for automatic doors different in Wales?

Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.

Next step

Telescopic sliding doors in Mold

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.