Covering Flint and nearby
Addresses anywhere in the CH6 postcode district can book telescopic sliding doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Flint, so the price, the booking and the paperwork all come from one place.
GP surgeries, dental practices and pharmacies in Flint often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Connah's Quay (4.7 miles), Mold (5.4 miles), Buckley (5.8 miles), Heswall (5.9 miles), Bebington (8.7 miles), Ellesmere Port (9.8 miles).
What to think about for telescopic sliding doors in Flint
- Care homes and supported living buildings in Flint may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Medical centres in Flint often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
- A telescopic header is deeper than a standard one. In older buildings in Flint with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
Telescopic sliding doors in Flint: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is telescopic sliding doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Flint.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Try the guide price tool for a quick figure, then arrange a free survey in Flint to fix the price for your telescopic entrance.
Telescopic sliding doors in Flint: questions
Can our existing sliding door in Flint be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What is the guide price for telescopic sliding doors in Flint?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Flint confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the telescopic door survey in Flint really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
How much wider will our entrance in Flint be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Flint shows the exact clear width before you commit.
What happens to the old door when a new one is fitted in Flint?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Do you service doors in Flint after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Flint?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.