Covering Wrexham and nearby
Our coverage of Wrexham takes in the LL13 postcode district and the neighbouring parts of Clwyd. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about telescopic sliding doors and we will confirm the arrangements and the price in writing.
Council offices, libraries, leisure centres and other public buildings in Wrexham usually buy through procurement rules. Itemised written prices, method statements and the paperwork a buyer needs can all be provided, and the work is carried out by specialist engineers working under our management.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Rhosllannerchrugog (3.8 miles), Buckley (9.1 miles), Mold (10.4 miles), Chester (10.8 miles), Connah's Quay (11.1 miles), Oswestry (13.0 miles).
What to think about for telescopic sliding doors in Wrexham
- Entrances across Clwyd that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- Hospital and supermarket entrances in Wrexham that run for long hours put more wear on the extra rollers and belts of a telescopic door. Plan a servicing arrangement from the start rather than waiting for the first fault.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
Telescopic sliding doors in Wrexham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Wrexham and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on telescopic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free site survey in Wrexham, and an engineer will measure the opening and send a drawing with a fixed, itemised quote for telescopic sliding doors.
Telescopic sliding doors in Wrexham: questions
What paperwork do we get after installation in Wrexham?
You receive the commissioning and test record, a site-specific risk assessment, user instructions and the conformity paperwork for the door. Keep them with your building records. They are the starting point for later servicing and safety inspections, and they show how the door was set up with reference to BS EN 16005.
What do you charge for telescopic sliding doors in Wrexham?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Wrexham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit telescopic sliding doors in Wrexham?
Yes. We arrange supply and installation in Wrexham and the rest of Clwyd. Specialist automatic door engineers working under our management carry out the survey and the fitting, and we stay the contracting party throughout, so one company is responsible for the drawing, the quote, the installation and the handover paperwork.
Will a telescopic door in Wrexham work with our fire alarm?
It can. The operator can take a signal from the fire alarm panel so the door opens and stays open, or does whatever the fire strategy for the building requires. The panel connection is usually made by your alarm engineer, and the quote shows who is responsible for each part of the work.
Can installation in Wrexham happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
What happens once the installation in Wrexham is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.