Covering Mold and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CH7 postcode district can be covered for frameless glass automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Older shopfronts are common in market towns, and some in Mold may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Buckley (2.4 miles), Connah's Quay (4.9 miles), Flint (5.4 miles), Wrexham (10.4 miles), Chester (10.5 miles), Heswall (11.3 miles).
What to think about for frameless glass automatic doors in Mold
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- The header needs a rigid fixing. In modern offices in Mold with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Cleaning staff at busy venues in Mold should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Hotels and restaurants in Mold often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
Frameless glass automatic doors in Mold: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in Wales
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Describe what you need. Whether the job is frameless glass automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Mold.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
For an all-glass entrance in Mold that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Mold: questions
Can a frameless door in Mold match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
Is there a guide price for frameless glass automatic doors in Mold?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Mold confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does fitting take in Mold?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
Do you fit frameless glass automatic doors in Mold?
Yes. We arrange supply and installation in Mold and throughout Clwyd, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
What does the free site survey in Mold involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for frameless glass automatic doors, with drawings where the door type needs them.
Can installation in Mold happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Do businesses in Mold have to fit automatic doors?
There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.