UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Northern Ireland

Sensor upgrades and replacement in County Down

For care homes and healthcare buildings in County Down, sensor set-up matters as much as the hardware. Safety zones are set to detect people standing still or moving slowly, with longer hold-open times where residents or patients need them.

Area
County Down
Nation
Northern Ireland
Towns listed
8
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Coverage across County Down

Wherever you are in County Down, we need the same three things to get started on sensor upgrades and replacement: a short description of the door, a few photos if you have them, and the address. From there we agree the price in writing and book a specialist engineer working under our management. Every town listed below has a page of its own, 8 in total.

Towns listed in County Down: Bangor, Newtownards, Newry, Banbridge, Dundonald, Holywood, Downpatrick, Comber.

What to think about for sensor upgrades and replacement in County Down

  • If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
  • Sites in County Down that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
  • Shopping parades and older shopfronts in County Down sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
  • After a near miss at a door in County Down, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
  • Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.

Sensor upgrades and replacement in County Down: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in Northern Ireland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. How often a door is maintained should follow the manufacturer’s information and how heavily it is used.

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
  2. Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
  3. On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
  4. Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.

Send a photo of the door and sensor at your building in County Down, and we will confirm the visit price and the likely sensor before booking an engineer.

Sensor upgrades and replacement in County Down: questions

Our door in County Down closes on people. Is that a sensor fault?

It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.

How are prices worked out for sensor upgrades and replacement in County Down?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in County Down, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Will new sensors stop false openings at our entrance in County Down?

Usually. Modern sensors can ignore cross traffic and detect only people moving towards the door, and the zone can be narrowed. If the entrance faces a busy street or catches heavy weather, the engineer may suggest a sensor that filters those conditions better.

Can you price new sensors for my door in County Down from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

Are parts quoted before they are fitted?

Always. If a repair or service in County Down needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.

Do you offer service contracts in County Down?

Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.

Which accessibility law applies in County Down?

In Northern Ireland the Disability Discrimination Act 1995 applies, because the Equality Act 2010 does not extend there. Service providers and employers are expected to make reasonable adjustments for disabled people, and an automatic door is a common one at entrances.

Next step

Sensor upgrades and replacement in County Down

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.