Covering Bishop Auckland and nearby
From shops and surgeries to schools, care homes and private houses, any building in the DL14 postcode district can be covered for revolving doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Small offices, community centres and village halls around Bishop Auckland tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for revolving doors (straight-line distance): Spennymoor (4.2 miles), Newton Aycliffe (4.9 miles), Durham (9.3 miles), Darlington (10.4 miles), Chester-le-Street (14.6 miles), Stanley (14.7 miles).
What to think about for revolving doors in Bishop Auckland
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Hotel entrances in Bishop Auckland see guests with large cases and families with pushchairs. A larger three-wing automatic door and a clearly signed pass door keep the flow moving.
- Some visitors to buildings in Bishop Auckland find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Busy reception areas in Bishop Auckland may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
Revolving doors in Bishop Auckland: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for revolving doors and book a survey in Bishop Auckland.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send photos and any drawings of the entrance in Bishop Auckland, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in Bishop Auckland: questions
Do you install revolving doors in Bishop Auckland?
Yes. We arrange manual and automatic revolving doors, with their accessible pass doors, for buildings in Bishop Auckland and across County Durham. Specialist automatic door engineers working under our management carry out the survey, installation and commissioning, and we are the contracting party throughout.
What do you charge for revolving doors in Bishop Auckland?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Bishop Auckland confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a revolving door project in Bishop Auckland take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Should we choose manual or automatic for our building in Bishop Auckland?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
What do you need from us for parking and access in Bishop Auckland?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What power supply is needed for revolving doors in Bishop Auckland?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Bishop Auckland have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.