UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic swing doors · County Durham

Automatic swing doors in Bishop Auckland

We supply and install automatic swing doors in Bishop Auckland and elsewhere in England, on single and double doors in timber, aluminium or steel. Operators for existing doors are typically 2 to 4 weeks from order, and most doors are fitted in a day.

Town
Bishop Auckland
Area
County Durham
Postcodes
DL14
Guide price
From £2,495 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Bishop Auckland and nearby

Coverage for automatic swing doors runs across the DL14 postcode district and out into the surrounding parts of County Durham. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Care homes in and around Bishop Auckland often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.

Nearby towns we also list for automatic swing doors (straight-line distance): Spennymoor (4.2 miles), Newton Aycliffe (4.9 miles), Durham (9.3 miles), Darlington (10.4 miles), Chester-le-Street (14.6 miles), Stanley (14.7 miles).

What to think about for automatic swing doors in Bishop Auckland

  • Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
  • Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
  • Power comes from a fused spur near the head of the door. In older buildings in Bishop Auckland with solid walls, allow time for surface trunking or chasing to reach the operator.
  • Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
  • Check the hinges first. Older doors in Bishop Auckland often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.

Automatic swing doors in Bishop Auckland: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.

ItemGuide priceNotes
Full-energy operator on an existing single door, with safety sensors£2,495 – £3,995installed, ex VAT
Operators on an existing pair of doors£3,795 – £6,495installed, ex VAT
New single automatic swing door set (door, frame and operator)£3,495 – £6,495installed, ex VAT
New double automatic swing door set£7,995 – £9,995installed, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bishop Auckland.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

For corridor, office or school doors in Bishop Auckland, send us photos and door sizes and we will plan the right swing operators.

Automatic swing doors in Bishop Auckland: questions

Will the swing operator in Bishop Auckland work with our fire alarm?

It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.

What is the guide price for automatic swing doors in Bishop Auckland?

Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bishop Auckland confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you fit automatic swing door operators in Bishop Auckland?

Yes. We arrange supply and installation of swing operators for doors in Bishop Auckland and throughout County Durham. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.

Do you fit low-energy operators in Bishop Auckland as well?

Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.

What do you need from us for parking and access in Bishop Auckland?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Do I need permission from a landlord or the council before work in Bishop Auckland?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

Who is responsible for automatic doors on escape routes in Bishop Auckland?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Automatic swing doors in Bishop Auckland

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.