Covering Bishop Auckland and nearby
For automatic entrance lobbies, coverage around Bishop Auckland is set by postcode and includes the DL14 postcode district, as well as nearby addresses in County Durham. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Older shopfronts are common in market towns, and some in Bishop Auckland may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Spennymoor (4.2 miles), Newton Aycliffe (4.9 miles), Durham (9.3 miles), Darlington (10.4 miles), Chester-le-Street (14.6 miles), Stanley (14.7 miles).
What to think about for automatic entrance lobbies in Bishop Auckland
- Surgeries and clinics in Bishop Auckland need lobbies wide and deep enough for wheelchairs, mobility scooters and people with walking frames. Avoid interlocks at public entrances unless there is a strong security reason for them.
- Office buildings on business parks in Bishop Auckland often have a reception desk close to the entrance. Keeping the desk out of line with the doors, and making the lobby deep enough, keeps the receptionist out of the draught.
- High street units in Bishop Auckland often have narrow, shallow shop fronts. An internal lobby may take sales space, so a glazed porch or a sliding outer set with a swing inner set can be a better fit.
- Two operators mean two power supplies, or one supply sized for both. Check whether there is a suitable supply at ceiling height, as cable runs across a finished foyer add cost.
- If the lobby is on an escape route, the fire strategy decides what both door sets do on alarm. Sequencing and interlocks must release so nothing stops people leaving.
Automatic entrance lobbies in Bishop Auckland: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic entrance lobbies in Bishop Auckland, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us how busy the entrance is and how much space you have in Bishop Auckland, and we will plan a lobby around it, beginning with a free site visit.
Automatic entrance lobbies in Bishop Auckland: questions
Will our entrance in Bishop Auckland have to close while the lobby is built?
Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.
Is there a guide price for automatic entrance lobbies in Bishop Auckland?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Bishop Auckland confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you add a lobby to our existing entrance in Bishop Auckland?
Usually, if there is enough depth inside the existing doors or room for a glazed porch outside. We check the space, the floor and the power at the free survey, then quote either an inner set to pair with your current doors or a complete new lobby.
Can you look after the lobby doors in Bishop Auckland after installation?
We can arrange planned servicing for both door sets, checking sequencing, safety sensors and alarm releases at each visit and leaving a written record. Servicing is charged per visit, and the price is confirmed in writing before an engineer comes out.
What do you need from us for parking and access in Bishop Auckland?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Do you service doors in Bishop Auckland after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Bishop Auckland?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.