Covering Bishop Auckland and nearby
From shops and surgeries to schools, care homes and private houses, any building in the DL14 postcode district can be covered for curved automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
GP surgeries, dental practices and pharmacies in Bishop Auckland often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for curved automatic doors (straight-line distance): Spennymoor (4.2 miles), Newton Aycliffe (4.9 miles), Durham (9.3 miles), Darlington (10.4 miles), Chester-le-Street (14.6 miles), Stanley (14.7 miles).
What to think about for curved automatic doors in Bishop Auckland
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- Listed buildings and conservation areas in Bishop Auckland may need consent for a curved entrance. Drawings showing the radius, frame colour and canopy detail help the planning authority understand the proposal.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across County Durham, think about how rainwater will leave the canopy without running down the glass into the threshold.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
Curved automatic doors in Bishop Auckland: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Bishop Auckland and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on curved automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey in Bishop Auckland to see whether a half-round or full-round door suits your building, with a fixed, itemised quote to follow.
Curved automatic doors in Bishop Auckland: questions
Can you work with our architect or main contractor in Bishop Auckland?
Yes. Many curved doors are part of a larger refurbishment or new build. We can work from the architect's setting-out drawings, agree the structural opening, canopy and floor details with the contractor, and fit the door at the right stage of the programme so finished floors and glazing are protected.
What will curved automatic doors in Bishop Auckland cost?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Bishop Auckland confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a curved door in Bishop Auckland replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
Will we need planning permission for a curved entrance in Bishop Auckland?
Possibly. A curved door that changes the look of the frontage or projects beyond the building line may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We raise the question at survey and can supply drawings and product details for an application.
Is there a warranty on curved automatic doors?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
What power supply is needed for curved automatic doors in Bishop Auckland?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Bishop Auckland?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.