Covering Wellington and nearby
Requests for frameless glass automatic doors in Wellington are handled by us and passed to a specialist engineer working under our management. Coverage includes the TF1 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.
In Wellington, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Telford (3.3 miles), Shrewsbury (9.9 miles), Stafford (18.3 miles), Wolverhampton (18.3 miles), Wednesfield (19.5 miles), Sedgley (19.8 miles).
What to think about for frameless glass automatic doors in Wellington
- Showrooms in Wellington with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- The header needs a rigid fixing. In modern offices in Wellington with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
- Cleaning staff at busy venues in Wellington should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
Frameless glass automatic doors in Wellington: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Wellington.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Planning an office fit-out in Wellington? Share your partition drawings and we will quote for frameless glass automatic doors to match, with a fixed, itemised price.
Frameless glass automatic doors in Wellington: questions
Do we need building approval for a frameless door in Wellington?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
What do you charge for frameless glass automatic doors in Wellington?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Wellington confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit frameless glass automatic doors in Wellington?
Yes. We arrange supply and installation in Wellington and throughout Shropshire, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
What should we do if the frameless door in Wellington is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
How are payments structured for work in Wellington?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What power supply is needed for frameless glass automatic doors in Wellington?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Wellington?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.