Covering Wellington and nearby
We cover the whole of the TF1 postcode district, along with nearby towns in Shropshire. You book each visit for automatic swing doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Many buildings in Wellington are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic swing doors (straight-line distance): Telford (3.3 miles), Shrewsbury (9.9 miles), Stafford (18.3 miles), Wolverhampton (18.3 miles), Wednesfield (19.5 miles), Sedgley (19.8 miles).
What to think about for automatic swing doors in Wellington
- Doors on escape routes in Wellington usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
- Power comes from a fused spur near the head of the door. In older buildings in Wellington with solid walls, allow time for surface trunking or chasing to reach the operator.
- Check the hinges first. Older doors in Wellington often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
Automatic swing doors in Wellington: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic swing doors and book a survey in Wellington.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Use the guide price tool for a quick figure, then let us survey the doors in Wellington and fix the price in writing.
Automatic swing doors in Wellington: questions
Do you fit low-energy operators in Wellington as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
What is the guide price for automatic swing doors in Wellington?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Wellington confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What paperwork do we get for automated doors in Wellington?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
Can you fit automatic swing door operators in Wellington?
Yes. We arrange supply and installation of swing operators for doors in Wellington and throughout Shropshire. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
Do I need permission from a landlord or the council before work in Wellington?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Wellington is agreed before work starts.
Which building regulations apply to a new automatic entrance in Wellington?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.