Covering Shrewsbury and nearby
From shops and surgeries to schools, care homes and private houses, any building in the SY1, SY2 and SY3 postcode districts can be covered for frameless glass automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Health centres, GP surgeries and clinics around Shrewsbury need doors that open gently and stay open long enough for patients using walking aids or wheelchairs. Low-energy operators, push pads and careful sensor set-up matter more here than sheer speed.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Wellington (9.9 miles), Telford (12.9 miles), Oswestry (16.4 miles), Welshpool (16.9 miles), Rhosllannerchrugog (24.3 miles), Wrexham (25.3 miles).
What to think about for frameless glass automatic doors in Shrewsbury
- Listed interiors and heritage buildings in Shrewsbury sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
- Hotels and restaurants in Shrewsbury often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- Showrooms in Shrewsbury with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Glass partitions in office buildings across Shropshire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Cleaning staff at busy venues in Shrewsbury should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
Frameless glass automatic doors in Shrewsbury: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Shrewsbury and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on frameless glass automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Planning an office fit-out in Shrewsbury? Share your partition drawings and we will quote for frameless glass automatic doors to match, with a fixed, itemised price.
Frameless glass automatic doors in Shrewsbury: questions
Can a frameless door in Shrewsbury be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
Can you give me a price for frameless glass automatic doors in Shrewsbury?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Shrewsbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What should we do if the frameless door in Shrewsbury is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
Can a frameless door in Shrewsbury match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
What is the lead time for frameless glass automatic doors in Shrewsbury?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Shrewsbury is agreed before work starts.
Who is responsible for automatic doors on escape routes in Shrewsbury?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.