Coverage across Hertfordshire
Curved automatic doors across Hertfordshire follows a simple pattern: you tell us about the door, we agree the price in writing, and a specialist engineer working under our management attends. Distance within the area does not change the process. Use the links below to reach the 19 towns we list, each with its own page, nearby places and guide prices.
Towns listed in Hertfordshire: Watford, Hemel Hempstead, Stevenage, St Albans, Welwyn Garden City, Cheshunt, Hatfield, Bishop's Stortford, Borehamwood, Hitchin, Hoddesdon, Letchworth, Harpenden, Bushey, Hertford, Rickmansworth, Potters Bar, Berkhamsted, Ware.
What to think about for curved automatic doors in Hertfordshire
- Hotel entrances in Hertfordshire see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
- Consider a spare curved panel for busy entrances in Hertfordshire. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.
- Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Hertfordshire, think about how rainwater will leave the canopy without running down the glass into the threshold.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
Curved automatic doors in Hertfordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Hertfordshire.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Talk to us about curved doors for your hotel, store or civic building in Hertfordshire. The survey is free and there is no obligation to proceed.
Curved automatic doors in Hertfordshire: questions
Is the site survey for a curved door in Hertfordshire free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
What will curved automatic doors in Hertfordshire cost?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Hertfordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a curved door project in Hertfordshire take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
Who looks after a curved door in Hertfordshire once it is fitted?
You can arrange servicing with us, with each visit priced in writing beforehand. Curved doors need regular attention to the floor guides and carriages that follow the arc. A trained engineer should check the safety functions at least once a year, and busy hotel or store entrances are usually serviced more often.
How much disruption should we expect while the work is done in Hertfordshire?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Hertfordshire is agreed before work starts.
Who is responsible for automatic doors on escape routes in Hertfordshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.