Covering Brighton and nearby
Engineers working under our management travel to addresses across the BN1 and BN2 postcode districts for safety and compliance upgrades. There is no depot or showroom in Brighton; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Older civic and commercial buildings often sit alongside modern blocks in Brighton and the surrounding parts of East Sussex. Where a listed building or a conservation area is involved, the owner may need consent from the planning authority before work on the entrance starts.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Hove (1.2 miles), Shoreham-by-Sea (5.9 miles), Peacehaven (6.3 miles), Lewes (7.2 miles), Lancing (8.0 miles), Burgess Hill (9.0 miles).
What to think about for safety and compliance upgrades in Brighton
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
- Doors serving care homes and hospitals in Brighton may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- Listed buildings and conservation areas in Brighton may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
Safety and compliance upgrades in Brighton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Brighton and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Talk to us about upgrading the automatic doors at your site in Brighton. The work can be phased by priority to suit your budget.
Safety and compliance upgrades in Brighton: questions
Do you need an inspection before upgrading a door in Brighton?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
What is the guide price for safety and compliance upgrades in Brighton?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Brighton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our door in Brighton has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
Can you quote from our existing inspection report in Brighton?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
What happens once the installation in Brighton is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What does the free site survey in Brighton involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for safety and compliance upgrades, with drawings where the door type needs them.
Which building regulations apply to a new automatic entrance in Brighton?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.