Covering Armagh and nearby
If your building is in Armagh, or anywhere in the BT60 and BT61 postcode districts, we can arrange safety and compliance upgrades. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Older shopfronts are common in market towns, and some in Armagh may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Portadown (10.3 miles), Dungannon (11.3 miles), Craigavon (13.1 miles), Banbridge (15.4 miles), Lurgan (15.6 miles), Newry (17.8 miles).
What to think about for safety and compliance upgrades in Armagh
- Programme switches within reach of the public in Armagh should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- Older shopfronts in Armagh often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- If your building in Armagh has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
Safety and compliance upgrades in Armagh: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in Northern Ireland
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Armagh and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free upgrade survey in Armagh and find out which changes will make your older automatic door safer for the people using it.
Safety and compliance upgrades in Armagh: questions
Can you quote from our existing inspection report in Armagh?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
Can you give me a price for safety and compliance upgrades in Armagh?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Armagh confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can upgrades in Armagh be phased over time?
Yes. Each item is priced separately, so you can start with the high-priority findings and plan the rest for later, often at the next service visit. Your quote shows which items are urgent and which can sensibly wait, so you can budget for each phase.
Is it cheaper to upgrade or replace our old door in Armagh?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
Can installation in Armagh happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
What is the lead time for safety and compliance upgrades in Armagh?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which marking should a new automatic door in Armagh carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.