UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Break-out escape route doors · Shropshire

Break-out escape route doors in Shrewsbury

Specialist automatic door engineers working under our management survey and install break-out escape route doors across Shrewsbury. Each door is tested in normal running, break-out, power failure and alarm modes, and the results go into your handover pack.

Town
Shrewsbury
Area
Shropshire
Postcodes
SY1, SY2, SY3
Guide price
From £7,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Shrewsbury and nearby

Sites across the SY1, SY2 and SY3 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Shrewsbury for break-out escape route doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.

Housing providers and managing agents in Shrewsbury look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.

Nearby towns we also list for break-out escape route doors (straight-line distance): Wellington (9.9 miles), Telford (12.9 miles), Oswestry (16.4 miles), Welshpool (16.9 miles), Rhosllannerchrugog (24.3 miles), Wrexham (25.3 miles).

What to think about for break-out escape route doors in Shrewsbury

  • Hospitals and clinics in Shrewsbury often want break-out entrances tied into the building management and fire alarm systems. Allow time for the alarm contractor to provide a signal and for the estates team to approve the interface.
  • Listed buildings and conservation areas in Shrewsbury may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
  • If a canopy, ramp or steps sit close to the door, measure how far a broken-out leaf will travel. A leaf that clips a handrail or step edge will not give the escape width the strategy assumes.
  • Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
  • Work on a busy entrance in Shrewsbury is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.

Break-out escape route doors in Shrewsbury: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.

ItemGuide priceNotes
Break-out sliding door set for an escape routefrom £7,995installed, ex VAT; typically up to £16,995
Converting an existing sliding door to break-outPriced on surveydepends on the frame, leaves and operator
Battery backup for power-cut operation£395 – £695per door, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Shrewsbury.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ready to replace a sliding entrance in Shrewsbury with one that breaks out? Book a free site survey and receive a written quote with the door, safety devices and lead time set out.

Break-out escape route doors in Shrewsbury: questions

How long will our entrance in Shrewsbury be out of use?

Usually one to three days on site, depending on the size of the opening and any building or electrical work. Where the entrance is the only way in, we plan the sequence so a temporary door or a partly open entrance can be kept, and agree any out-of-hours working in the quote.

How much should I budget for break-out escape route doors in Shrewsbury?

Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Shrewsbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Our shop in Shrewsbury is inside a shopping centre. Can you still fit a break-out door?

In most cases, yes. Centre management usually sets rules on contractors, working hours and connections to the centre's fire alarm. We work within those rules, provide the method statements and insurance details they ask for, and plan the fitting so the unit can trade for as much of the time as possible.

Can you work with our fire risk assessor in Shrewsbury?

Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.

Can installation in Shrewsbury happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

How much disruption should we expect while the work is done in Shrewsbury?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

Who is responsible for automatic doors on escape routes in Shrewsbury?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Break-out escape route doors in Shrewsbury

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.