Coverage across West Yorkshire
Coverage for automatic swing doors extends across all of West Yorkshire, including addresses some distance from the towns listed below. We are the contracting party, the engineers work under our management, and the price is agreed in writing first. If your town is not among the 26 we list, contact us anyway; the process and guide prices do not change.
Towns listed in West Yorkshire: Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley, Keighley, Castleford, Pontefract, Batley, Yeadon, Brighouse, Shipley, Cleckheaton, Pudsey, Ossett, Normanton, Guiseley, Rothwell, Liversedge, Horsforth, South Elmsall, Mirfield, Heckmondwike, Bingley.
What to think about for automatic swing doors in West Yorkshire
- Check the hinges first. Older doors in West Yorkshire often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across West Yorkshire, consider whether a canopy or a sliding door would work better.
- Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
- Hospital and care home corridors in West Yorkshire need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Office buildings in West Yorkshire with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
Automatic swing doors in West Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic swing doors in West Yorkshire, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Book a free survey in West Yorkshire, and an engineer will check your doors, hinges and fire labels and recommend the right operator.
Automatic swing doors in West Yorkshire: questions
Is the survey for swing doors in West Yorkshire free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
What will automatic swing doors in West Yorkshire cost?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in West Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How quickly can a swing operator be fitted in West Yorkshire?
Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.
Do you fit low-energy operators in West Yorkshire as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
How much disruption should we expect while the work is done in West Yorkshire?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in West Yorkshire is agreed before work starts.
Who is responsible for automatic doors on escape routes in West Yorkshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.